Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

In this Discussion

Hosted by Antelecom

High Speed Internet Access by Antelecom

Cross bar install

in Sponsor - MonacoWatts   Must be logged on to post
Note
My cross bars for the rear are being shipped! I will put together some pieces of wood in steps to elevate the rear of the coach to enable me to work underneath. Does the front need to be elevated also?? I know it has to be at “ride height” when torqued down and checked for clearance.
Thanks in advance and I’m so looking forward to being able to drive this coach for more than a few hours at a time.

Comments

  •   Must be logged on to post
    Note
    PM

    No need to raise the front. The only requirement is that the air bags be inflated to normal ride height.

    Mike and Wanda
    2008 Safari Cheetah 38PDQ, 350 C7, TRW, F/R X-Bars, F/R Watts, FSD, STP, TST
    2016 F150 4x4 Toad, Blue Ox, AFO

Sign In or Register to comment.