Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
In this Discussion
Don't know which units work with my application.
I am trying to determine which part numbers to purchase.
Front Watts Kit
Rear Watts Kit
Rear Cross Bar Kit
1999 Monaco Windsor 38', one slide, side mounted radiator
VIN # 1RF120511X2006980
2 axle
Roadmaster chassis, that says "R-3100". I am assuming this is what is commonly referred to as a RR8S chassis, but that is only a guess from the Monaco brochure, and after reading some threads on IRV2.
3 Hyd Jacks, with 4 external springs on each jack
The distance between the front Jack mount and the H-Frame is 7 3/4"
The rear does not have 3" down tubes. I am guessing this means that I would not be able to install the Rear Watts Kit?
I only made an approximate measurement on the diagonal length for the Rear cross kit. That one seems pretty straight forward. I just wasn't able to get under the coach far enough to make an accurate measurement.
Any further advice would be appreciated.
Thanks in advance for your help.
Comments
Ordered Front Watts Kit HFWK-E734, and Rear Cross Bar Kit CBK50 today, 4-26-23. Would have ordered the Rear Watts Kit, but, no down bars to mount it. Looking forward to installing them before the summer heat hits here in Havasu.